partial product

英 [ˈpɑːʃl ˈprɒdʌkt] 美 [ˈpɑːrʃl ˈprɑːdʌkt]

部分积;部分产品

计算机



双语例句

  1. Generally, iterative methods track demonstrative progress in project artifacts ( usually partial implementation of the to-be-delivered product or system) against plan.
    一般地,迭代方法追踪针对计划的项目工件(通常部分实现要交付的产品或系统)中的明确的发展。
  2. For general consumers also have the same mentality, they do not listen to only partial efficacy of the product will also pay attention to the safety, stability, and practical.
    对于大众消费者也是有同样心理,他们不只会偏听产品的功效,也会注意产品的安全、稳定、实用。
  3. Vendor will not be allowed to partial ship any product without authorization from this purchasing group.
    不允许卖主在未经采购团授权的情况下对产品进行部分出货。
  4. Note: a failure is a significant event; partial, degraded, intermittent, or total product failure.
    注意:故障是不可忽略的:局部的、分解的、间隔的、或全部的产品故障。
  5. Finally, according to this new method, a partial research on target project is carried on and new product is developed according to the research result.
    最后,依据本方法,对于目标项目进行局部的设计研究,并根据设计研究的结果进行系列产品的新品开发设计。
  6. However, it's partial to consider that Policy ethics is the product of modern society and the only form of market economy.
    但由此就认为制度伦理是现代社会的产物,是市场经济的唯一形式显然又是有失偏颇的。
  7. Technology of "Variable Pressure Method" vacuum dry impregnation can shorten one third treatment time with increasing partial discharge pass rate of power capacitor to improve product quality and with lower energy consumption.
    变压法真空干燥浸渍工艺能缩短时间三分之一,提高了电容器的局部放电合格率,从而提高了产品质量,节省了能源。
  8. H, and the partial draught of end product drawing is controlled at 18%~ 20%.
    成品拉拔的部分压缩率控制在18%~20%。
  9. Partial Flexible Technology Selection in Product Life-cycle
    面向产品生命周期的部分柔性技术选择
  10. Research on control of partial adjust mechanism in auto-assemble product line of mobile phone key
    手机按键自动装配生产线纠偏机构控制研究
  11. A novel 4:2 compressor is used in the partial product compression, which further reduces the latency and area.
    压缩阵列采用了一种新型4∶2压缩器,进一步缩短了延时,节省了面积。
  12. On the basis of the data found in the literature and our own experimental data, a reaction mechanism was postulated for acetylene synthesis by the partial combustion of methane. Accordingly, the product gas compositions were calculated under various reaction conditions in pseudo-equilibrium states.
    我们根据文献资料和实验结果,对甲烷部分燃烧制乙炔反应的主要过程提出了初步的假设,由此计算了在不完全平衡时不同反应条件对产物气组成的影响。
  13. Simulation was conducted across wide ranges of partial pressure of water vapor in the air, product initial temperature, water activity, diffusivity, at food surface and effective diffusivity inside food.
    模拟计算涉及环境中水蒸气分压力、食品初始温度、水分子活性、食品表面及内部扩散力。30分钟释放压力(3)在振荡腔内的和水楔作用;
  14. A Kind of Partial Inner Product on Banach Space
    Banach空间一类半内积及其表现
  15. In multiplication, we use partial product to reduce hardware.
    在乘法计算中采用部分乘积法,节省硬件。
  16. Application test of FLOXS drag reducer in partial section of Gela Oil Product Pipeline has been carried out.
    在格拉成品油管道上对局部管段进行了FLOXS减阻剂的应用试验。
  17. At last, combinationmanufacturing industry has realized the partial functions of product mix and disposition management.
    最后,结合制造业的特点,实现了产品结构与配置管理的部分功能。
  18. Effect of co_2 partial pressure on the morphology of corrosion metallic product scales
    CO2压力对金属腐蚀产物膜形貌结构的影响
  19. A partial least squares regression model is used to predict the product quality based on high frequency process measurements.
    该方法首先通过正常工况的历史数据,建立一个部分最小二乘的回归模型,利用高采样频率的过程测量值来预测质量变量的值。
  20. This paper describes the design of a kind of 32 × 32bit fast parallel multiplier, introduces partial product generation circuit based on modified Booth algorithm, Wallace tree and 4 ∶ 2 compressor.
    本文描述了一种32×32位快速并行结构乘法器,介绍了基于修正布斯编码算法的部分积产生电路,并对部分积的符号扩展进行了简化。
  21. The probability density function of partial strain loading of product is defined in accordance with the relevant theory of random vibration test.
    根据随机振动试验的有关理论,确定产品局部应变载荷的概率密度函数。
  22. The partial product producer mainly uses the Booth II algorithm, reduced the partial product number greatly which in the multiplication accumulation operation produces, thus enhances the entire multiplication accumulator the operating speed;
    部分积产生器主要采用BoothⅡ型算法,大大减少了乘法累加操作中产生的部分积数目,从而提高整个乘法累加器的运算速度;
  23. Analysis of the Unified Condition of Partial and Full Economic Benefit from Investment in Electronic Product Reliability
    可靠性投资局部经济效益与完全经济效益相统一的条件分析
  24. In this paper, the authors give a representation of the relation matrix of the cardinal product of two partial ordered sets by the tensor product of their relation matrices, which helps to obtain a kind of method to check the associative law of binary operation.
    利用矩阵的张量积给出了偏序集基数积的一种矩阵表示,得到了检验有限集合上的代数运算满足结合律的一种方法。
  25. In partial product generation, we adopted limited sign extension technique which reduces the length of partial product.
    部分积的产生中采用了有限符号扩展技术,减小了部分积的长度。
  26. Aiming at the multiplier based on Radix-4 Booth encoding, a method entirely eliminating additive operation on partial product generating is advanced, which effectively decreases crucial path delay and chip area consumption. 4.
    针对Radix-4Booth编码乘法器,提出了一种完全消除部分积生成时加法运算的方法,有效地减小了关键路径延迟和芯片资源消耗。
  27. After that, the multiplier architecture of mine was proposed. A 30-transistors encoder and the circuit of the generation of partial product with translation gate, and a compression architecture between Wallace tree and iterative array was designed.
    随后提出了自己的乘法器设计架构,设计了一个30管的编码电路和传输门结构的部分积产生电路以及一种界于Wallace树和重复阵列之间的折中压缩结构。
  28. Generally speaking, the fewer partial product, the more complex and slower the partial product circuit is, so both need considering to select the best algorithm.
    通常来讲,产生部分积的数目越少的算法,其电路越复杂,因此需要综合两点考虑来选择合适的算法。
  29. In the micro-architecture of triple-clock PE, a hybrid dual-field Wallace tree is modified to compress the partial product.
    在三时钟PE的微结构中,改进了一种双域Wallace混合树型结构对部分积进行压缩。
  30. The change of SO2 partial pressure, O2 partial pressure, average porosity and average pore radius of product layer on unreacted core were discussed based on the model. The features of calcination in constant temperature were also discussed.
    在本文所建立模型的基础上讨论了未反应核表面SO2、O2分压的变化,产物层平均孔径和平均孔隙率的变化,并且讨论了实验工况难以实现的恒温煅烧特性。